- No compromise downhill fork
- Outstanding small bump sensitivity and responsiveness
- UCI world cup circuit approved
- Designed, engineered & tested in Freiburg / Germany
- Assembled 100% in-house and by hand – One at a time
Price: 2099 Euro (incl. VAT)
Made for bike parks and downhill tracks, the Infinity takes all tracks with ease and has proven itself worthy on Downhill Cup circuits. Rock gardens, roots and big features are its natural habitat - the perfect tool to find your own personal limit.
The design of upside down forks allows for a longer casting / upper tubes and thus distance between bushings can be increased to support the extended length of the downtubes more efficiently than on any right side up fork, resulting in a very smooth and friction free suspension feel.
Our DH-ready damping and airspring provides an unmatched subtleness and a natural, predictable feel.
In case you wish for more progression: A volume spacer which can be installed in 2 positions is included.
Our forks are especially easy to service and specific tools are not required. Changing travel is also easily possible, no extra airshaft needed! Just open the fork with your regular toolset of choice and adjust travel spacers. For more information about service and travel adjustment check out the Tech section.
CHECK SPECIFICATIONS FOR FURTHER INFORMATIONS
Ride Style | Downhill / Freeride |
Travel Range | Maximum stroke 215mm / Adjustable in 10mm steps / Theoretical minimum stroke 0mm |
Wheel Size | 27.5" / 29" (Unisize) |
Spring Type | Air spring |
Damping | Open bath cartridge |
Adjustments | Rebound / Compression / Air spring / Progression |
Weight | 2550g |
Brake Mounting | 180mm / 203mm brakemount (Boost or Non-Boost) |
Dropout | 15mm / 20mm x 110mm (15mm reduction with 20to15 adapters) |
Axle System | Bolt-On thru axle |
Axle Material | Titanium / Steel |
Fork Offset / Rake | 44mm / 51mm |
Axle To Crown | 215mm (590) / 205mm (580) / 195mm (570) / 185mm (560) with 27.5" / 205mm (595) / 195mm (585) / 185mm (575) with 29"... You get the idea! |
Maximum Headset Length | 130mm (Measurement incl. headset with 29") |
Steerer Tube | 1 1/8" |
Stem Mount | Direct mount |
Crown Race Seat Diameter | 30.00mm |
Crown Material | High strength alloy |
Stanchions Material | High strength alloy |
Stanchions Diameter | 35mm |
Lowers Material | High strength alloy |
Colour | Black anodized / Silver anodized (Silver anodized comes with black crowns) |
Other | Royal flush coating / SKF D35 green dust wipers (Without collar) / Main and current sag indicators |
Travel adjustment & suspension fluid change
Installation guide volume spacer
Intend Air Spring & Damping assembly
This hoses are not 100% compatible to USD forks. they are weak and easy to bend. As the hose at a USD fork needs to slide through the upper guides, the use of steel braided hoses causes problems. That is why I recommend normal brake hoses, they work for 100%
20mm axles vary by weight and wall-thickness.
20mm Light 75g (recommended also for regular enduro use)
20mm Heavy 150g (recommended for hard/extreme heavy riders)
This option is not available.
Edge, Flash and Infinity forks until end of 2021 share the same dropouts. You can choose between 180mm boost and non-boost, as well as 203mm boost and non-boost.
Dropouts used on Hero as well as Edge, Flash, Bandit from 2022 are different and compatible with PM180 and PM203, both only in Boost.
This option is not available. You can simply use normal brake adapters to make that combination work.
Yes! You can put any 223mm rotor on Edge, Flash, Bandit and Infinity forks.
Intend Samurai CC, XC and GR are only possible up to 203mm.
This is not possible any more since beginning of 2022. You can either buy a 20mm dropout or a 15mm dropout.
Only on our Infinity forks, you can use 110×20 non-boost hubs, combined with the correct non-boost brake mount. 100x15mm hubs are possible with Boost-spacers.
This option is not available.
Yes! You can easily adjust the stroke by adding or removing 10mm spacers.
Yes! By exactly 10mm.
This option is not available.
You can have any color as long as it is black anodized. We do not offer any other colors. Only black.
Color options other than black anodized are not available. The reason is, that anodizing in not-black causes so much troubles, that we cannot guarantuee a problem-free, nice looking product trough the whole range. When we sell products, we want to do it perfect, and need to skip all variations which are not “perfect”.
All our forks are compatible with torque caps, except the Samurai models, due to the minimalistic dropouts.